Satellite-6 and Cr3C2-NiCr coatings to improve wear behavior of En-45
Wear occur between two surfaces when they are in contact. Main factor that contribute to wear is friction. The dimensions of the component changes when wear results. It may require replacement when small amount of material has been removed. The removal of material during wear is slow process but very continuous and steady. Wear is a common phenomenon in most plant and machinery and is often a slow and progressive process. As the rate of wear is high so it requires frequent repair and replacement. Due to wear the dimensions of the product change. Now a days’ surface coating is applied to a great extent to improve the surface characteristics of material and to reduce wear. Detonation spray coating represents cost effective and important technique for modifying the surface properties of engineering components with a view to enhancing their performance and durability. Detonation spray coating increasingly being used to improve the performance of engineering component including gear, bearing and metal cutting tool due to their high hardness and mechanical structural properties .In the present research study efforts will be made to reduce the wear resistance of leaf spring.
- Paperback | 60 pages
- 150 x 220 x 4mm | 106g
- 03 Apr 2017
- LAP Lambert Academic Publishing
About Chamkaur Singh
Dr. Chandan Deep Singh is working as an assistant professor in department of mechanical engineering, Punjabi University, Patiala. He completed his Ph.D. in 2016. He has a good academic record. He has guided around 30 M.Tech students and has around 60 publications.