Laser-Induced Materials and Processes for Rapid Prototyping
The term rapid prototyping (RP) refers to a generic group of emerging technologies that enable very quick fabrication of engineering components primarily targeted for prototyping applications. With RP, very complex three- dimensional parts or prototypes can be fabricated without the need of costly tooling and machining. This inevitably leads to much shorter design cycle time and lower cost of building a prototype. Its manifold benefits include significant productivity gains, cost saving, and shortened development time to introduce concept models. As such, RP technologies have attracted tremendous R&D interests from both academia and industry in the past decade. Many different processes and materials have been commercialized and used in industry primarily for the fabrication of physical prototypes. More recent interests in RP technologies are towards functional applications of the fabricated parts, such as in rapid tooling applications and replacements of damaged components. Many processes and materials have been commercialized but are yet to be able to fulfill the aforementioned functional requirements because of limited mechanical strengths of the fabricated parts.
- Hardback | 267 pages
- 154.9 x 243.8 x 22.9mm | 589.68g
- 30 Jun 2001
- Dordrecht, Netherlands
- 2001 ed.
- 128 Illustrations, black and white; XVI, 267 p. 128 illus.
Table of contents
Preface. Acknowledgements. 1. Introduction. 2. Fundamentals of Laser-lithography Processes. 3. Material Characterization of Laser-lithography Built Parts. 4. Improvements of Mechanical Properties by Reinforcements. 5. Selective Laser Sintering. 6. Metal-Based System via Laser Melting. 7. Laser Sintering of Ceramics. 8. Characterization, Modeling and Optimization. 9. Rapid Tooling and Its Applications. Index.