Instrumentation Level 4 Trainee Guide, Binder
Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx.
Annotated Instructor's Guide (AIG) Paperback 0-13-108924-2
AIG Binder 0-13-108925-0
Computerized Testing Software 0-13-109124-7
Transparency Masters 0-13-109121-2
Out of ideas for the holidays?
- Paperback | 304 pages
- 213.36 x 271.78 x 25.4mm | 498.95g
- 25 Apr 2004
- Pearson Education (US)
- Upper Saddle River, NJ, United States
- 2nd edition
Looking for beautiful books?
Other books in this series
01 Jun 2007
01 Jun 2007
23 Oct 2008
02 Jan 2010
22 Oct 2011
01 Jul 2009
02 Sep 2004
28 Jan 2006
24 May 2002
20 Jul 2009
01 Jan 2009
25 Feb 2011
Table of contents
12401-03 Digital Logic Circuits (10 Hours) Describes the various electronic circuits and gates used in digital control circuits and the truth tables for each. Covers variations on gates, such as flip-flops, shift registers, and counters.
12402-03 Instrument Calibration and Configuration (65 Hours) Introduces methods of instrumentation calibration, including the three- and five-point methods. Covers components that require calibration in pneumatic, analog, and smart loops, as well as methods commonly used to calibrate these components.
12403-03 Performing Loop Checks (7.5 Hours) Covers loop check steps, including verifying mechanical installation, validating that the loop has correct tag numbers, performing loop checks, and finally proving the loop.
12404-03 Troubleshooting and Commissioning a Loop (10 Hours) Teaches methodical troubleshooting techniques used to locate problems in control loops. Also addresses how to isolate a loop in order to troubleshoot it. Covers commissioning of a loop once it is repaired, loop checked, and calibrated.
12405-03 Tuning Loops (15 Hours) Introduces formulas and their applications to PID control. Offers a theory-based approach to PID control and its application in industrial process control. Addresses open, closed, and visual loop tuning.
12406-03 Programmable Logic Controllers (10 Hours) Introduces the application of PLCs in industrial process control, as well as the binary numbering system used in computer-based control. Covers components of PLCs, including power supplies, I/O modules, processor modules, types of communication bus, and memory.
12407-03 Disturbed Control Systems (10 Hours)
Describes how DCS was developed by combinitechnologies of single loop control, direct digisupervisory control. It covers DCS basic hardware requhow control loops are implemented into a DCS, types of data transmission used in DCS, communication protocohuman interfaces.
12408-03 Analyzers (20 Hours) Defines various types of analyzers and their applications in industrial process control. Includes a discussion of analyzers that measure or monitor variables such as density, specific gravity, viscosity, turbidity, flashpoint, oxidation-reduction potential (ORP), pH, conductivity of a liquid, oxygen, carbon monoxide, carbon dioxide, hydrogen sulfide, total hydrocarbon content (THC), and particulates in a clean room. Also defines chromatography and ultraviolet and infrared analyzers.