Adhesive Joints : Formation, Characteristics, and Testing
This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater- ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in- terfacial aspects, joint design, mode of stress, external environ- ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
- Paperback | 931 pages
- 178 x 254 x 47.5mm | 1,768g
- 12 Oct 2011
- Springer-Verlag New York Inc.
- New York, NY, United States
- Softcover reprint of the original 1st ed. 1984
- 931 p.
Table of contents
I. Substrate and Interfacial Aspects.- The Role of Surface and Bulk Characterization in the Evaluation of Adhesive Joints.- Practical Adhesion Measurement in Adhering Systems: A Phase Boundary Sensitive Test.- Effect of a Phenol Formaldehyde Resin on the Adhesion of a Polysulfide Sealant.- Polysulfide-Polyurethane Interfacial Aspects.- Epoxy Resin Wetting of E Glass Single Filaments as it Relates to Shear Strength.- II. Factors Influencing Behavior of Adhesive Joints.- Influence of Surface Roughness on Mechanical Properties of Joints.- The Effects of Surface Conditioning of AISI-304 Stainless Steel on the Interfacial Properties of Alloy/Epoxy Composite Structure; Adherend Surface Characterization Using X-ray Emission Spectroscopy (LEEIXS).- Surface Characterization of Anodic Oxides on Aluminium Alloys by Means of Surface Potential Difference, Surface Impedance and Surface Morphology.- Investigation into the Effect of Surface Treatment on the Wettability and the Bondability of Low Surface Energy Materials.- The Effect of Moisture on the Dimensional Stability of Adhesively Bonded Joints.- The Dimensional Stability of Epoxy Adhesive Joints.- Strength Characteristics of Mono and Multiple-Wire Steel to Steel Joints Bonded with an Epoxy Adhesive.- A Study of Adhesive Joints Between Aliphatic Polyamides and Metals.- "Honeymoon" Phenolic Fast-Setting Adhesives for Exterior Grade Finger Joints.- Ageing of Structural Film Adhesives - Changes in Chemical and Physical Properties and the Effect on Joint Strength.- Structural Adhesives Based on Diallyl Phthalate.- Possibilities of Integrating Surface Treatment of Bonding Parts in the Adhesive Bonding Process.- III: Evaluation and Characterization.- Evaluation of Adhesive Test Methods.- A Critical Appraisal of Dental Adhesion Testing.- Adhesive Joint Characterization by Ultrasonic Surface and Interface Waves.- Nondestructive Evaluation of Some Bonded Joints.- Ultrasonic Assessment of Cure Rate Effects in Bonded Honeycomb Structures.- The Three-Point Bend Test for Adhesive Joints.- Accelerated Aging Procedures for Glue-Wood Bonds and Their Use for In-Plant Quality Control.- Peel-Strength and Energy Dissipation.- The Estimation of Adhesion in Filled Polymer Systems.- IV. Durability or Stability Aspects.- Adhesion and Durability of Metal/Polymer Bonds.- Failure Mechanisms in the Boundary Layer Zone of Metal/Polymer Systems.- Joint Durability Studies with Abraded, Etched, Coated and Anodized Aluminum Adherends.- Comparative Study of Aluminum Joint Strength and Durability with Varying Thickness, Boehmite-Type Oxide Surfaces.- Epoxy Adhesion to Copper, Part II: Electrochemical Pretreatment.- Hydrothermal Stability of Titanium/Epoxy Adhesive Joints.- A Study on Elastomer/Metal Bonds Applicable in Underwater Sonar Systems.- V. Stress Analysis and Performance Aspects.- Life Prediction Methodology for Adhesively Bonded Joints.- Stress Analysis of Adhesively Bonded Joints.- The Impact Strength of Adhesive Lap Joints.- The Performance of Adhesive-Bonded Thin-Gauge Sheet Metal Structures with Particular Reference to Box-Section Beams.- Cyclic Debonding of Adhesively Bonded Composites.- Effects of Low Cycle Loading on Shear Stressed Adhesive Bondlines.- Effect of Scrim Cloth on Adhesively Bonded Joints.- VI. Fracture Aspects.- Mechanical Measurement of Interatomic Bonding Energies at Interfaces.- Review of Continuum Mechanics Factors in Adhesive Fracture.- Fracture Energetics of Adhesive Joints.- Fracture of Composite-Adhesive-Composite Systems.- Characterization of the Fracture Behavior of Adhesive Joints.- Structural Precursors to Fracture in Adhesive Joints.- Fracture Toughness of Elastomer Modified Epoxy Adhesives.- A Three-Dimensional Analysis of a Butt Joint with a Flaw.- The Influence of Layer Thickness and Internal Stresses on the Bond Strength of Metal-to-Ceramic Joints.- Bond Strength Characterization of Metal-to-Ceramic and Adhesive Joints by Critical Energy Release Rates.- Interfacial Properties of Filled Epoxide Resins.- About the Contributors.